SUPPORT
Unplug support.
Most answers are in the setup guide. If something still isn’t working, email hello@seventeenworks.com and include your iPhone model and iOS version. We usually reply within two business days.
The tag won’t scan
- Hold the top edge of your iPhone, where the NFC antenna is, flat against the tag for a second or two.
- Make sure it’s an NTAG213, 215, or 216 tag. iPhone can’t read MIFARE Classic tags or 125 kHz RFID tags.
- Ordinary tags don’t work stuck directly on metal. Use an anti-metal tag there instead.
- Thick or metal phone cases, and cases with a magnetic wallet, can block NFC.
“Unrecognized Tag”
Unplug only responds to the tag you paired. Open Settings → Pair Existing Tag and scan the tag again. Pairing a new tag replaces the old one.
Apps aren’t being blocked
- Check that you picked at least one app in Settings → Select Apps to Block.
- In iOS Settings → Screen Time, make sure Screen Time is turned on.
- If you denied access earlier, open Unplug and tap Allow Access.
I lost my tag
Run Toggle App Blocking in the Shortcuts app, or say “Toggle blocking in Unplug” to Siri. Turning blocking off always works this way. Then pair a new tag in Settings.
The automation doesn’t run
In Shortcuts → Automation, open your NFC automation and make sure Run Immediately is selected. Your iPhone must be unlocked when you tap the tag.